【金属探测器详细说明】
品名：食品金属探测器 
产地：上海
型号：BH-SP
 
应用特性检测产品：块状产品（包括已包装的产品，如包装后的散料）
安装于：传送带流水线
使用行业：食品行业、化学行业、医药行业、纺织行业、包装行业、其他行业

BH-SP食品金属探测器特性：新型线圈技术（非金属区更小），因此输送机机身更短小，最大承重为5kg。
全镜面不锈钢结构，确保机器的检测稳定，性能良好，使用寿命长；满足食品行业的卫生要求，拆卸简单，方便清洗；
可自动学习并补偿产品效应。
检测产品效应大或特殊包装的物品时，可选低频处理技术。
满足IFS及HACCP认证要求.

金属探测器系统组成：
    检测系统：双通道金属探测圈 ，长方形口径（不可分的）
    控制系统：ADLINE微处理控制器
    传 送 机：全焊接，高强度不锈钢结构，联体式PU(聚氨酯) 输送带
    驱    动：90W电机、减速箱集成化

BH-SP金属探测器典型应用：包装后检测－－出厂前的最后金属检测、 称重时检测、 贴标签时检测

金属探测器技术参数：
    设备长度：1000mm   输送带离地高度：680mm
    有效检测通道 （宽度/高度）：250、300、400/100、120、150±25
    检测精度：Φ铁球/Φ不锈钢 ：0.7、1.0、1.2/1.5、2.0、2.3
以上灵敏度为空机无环境干扰条件下测得，金属探测器实际使用会因产品成分干扰和使用环境的不同略有差异。

Food Metal detectors:
Application features detection products: block products (including packaging products, such as packaging of bulk materials)
Installed in: belt line
Food industry, chemical industry, pharmaceutical industry, textile industry, packaging industry, other industries.

OMD-A-M Metal detectors can detect the iron impurities from the products with aluminum foil or metallized packaged .With the new technology of detection coil,the detector can make the whole system more smaller In the case of detection accuracy is not affected . Short body is also convenient for the existing transmission system to integrated with.

With the new technology of new coil (it will be more smaller in the Non-metallic area) , the conveyor body is more smaller.

The maximum load is 5-30kg.
The stainless steel structure with full mirror can ensure the stability of the machine detect, good performance and long life for use.
It is also satisfied with the requirements of food industry hygiene for easily removed and cleaned.

It can selectable low-frequency processing technology when detect the product with large effects or special packaging.
Meet the requirements of IFS and HACCP certification.
Dual-channel metal detection coil with rectangular aperture (no points)
Control system: ADLINE microprocessor controller
Conveyors: Joint-body PU (polyurethane) conveyor belt with all welded, high strength stainless steel structure  

Drive: 90W motor, gear box integration
Detect the products before them leave the factory: The final metal detection(After packing, when weighing, when labeling)
Device Length: 1000mm Ground Clearance belt: 680mm
Effective detection channel (width / height): 250,300,400 / 100,120,150 ± 25
Detection accuracy: Φ ball / Φ stainless steel: 0.7,1.0,1.2 / 1.5,2.0,2.3